Mirrors
Rear-view mirror
 |
Adjust the rear-view mirror by hand so you have a good overview of the traffic conditions.
|
Rear-view mirror (manual anti-dazzle)
 |
 | Anti-dazzle switch |
|
| |
Anti-dazzle mode: flick anti-dazzle switch forwards or back.
|
Rear-view mirror (automatic anti-dazzle*)
The rear-view mirror automatically goes into anti-dazzle mode if the ignition is switched on and incident light from headlamps strikes the sensor in the rear-view mirror.
The mirrors do not go into anti-dazzle mode if reverse gear is engaged and the interior lighting is switched on.
 | Risk of accident |
|
If incident light from headlamps is blocked from striking the sensor in the rear-view mirror, for example by luggage piled too high in the vehicle, the mirror's automatic anti-dazzle function will not operate.
Incident light could then dazzle you. This may distract you from the traffic conditions, and you may thereby cause an accident. In this case, adjust the rear-view mirror manually.
|
Exterior mirrors
| Risk of accident |
|
The exterior mirrors reduce the size of the image. Objects are actually closer than they appear. You could misjudge the distance from vehicles driving behind and cause an accident, e.g. when changing lane. For this reason, make sure of the actual distance from the vehicle driving behind by glancing over your shoulder.
|
The convex exterior mirrors give a larger field of vision.
At low outside temperatures, the exterior mirrors are heated automatically.
Adjusting the exterior mirrors
 |
| Adjustment button |
 | Right-hand exterior mirror |
 | Left-hand exterior mirror |
|
| |
Make sure that the key is in position 1 or 2 in the ignition lock.
|
| |
Press button for the right-hand exterior mirror or button for the left-hand exterior mirror.
|
| |
The indicator lamp in the corresponding button lights up in red.
The indicator lamp goes out again after some time. You can only adjust the selected mirror using adjustment button as long as the indicator lamp is lit.
|
| |
Press adjustment button up, down, to the right or to the left until the exterior mirror is set in a way which provides you with a good overview of traffic conditions.
|
Folding the exterior mirrors in or out electrically*
 |
| To fold the exterior mirrors in or out |
|
| |
Make sure that the key is in position 1 or 2 in the ignition lock.
|
| |
Briefly press button .
|
| |
Both exterior mirrors fold in or out.
|
 | |
|
Make sure that the exterior mirrors are always folded out fully while the vehicle is in motion; otherwise, they may vibrate.
|
Resetting the exterior mirrors
If the battery has been disconnected or has become discharged, the exterior mirrors must be reset. Otherwise, they will not fold in when you select the "Fold in mirrors when locking" function in the on-board computer more.
| |
Make sure that the key is in position 1 in the ignition lock.
|
| |
Briefly press button .
|
Folding the exterior mirrors in or out automatically*
If the "Fold in mirrors when locking" function is activated in the on-board computer more:
-
The exterior mirrors fold in automatically as soon as you lock the vehicle from the outside.
-
The exterior mirrors fold out again automatically as soon as you unlock the vehicle and then open the driver's or front-passenger door.
