Memory functions*
Storing settings
You can store up to three different settings using the memory button.
The following settings are stored as a single memory preset:
-
Position of the seat, backrest and head restraint
-
Driver's side: steering-wheel position
-
Driver's side: position of the exterior mirrors on the driver's and front-passenger sides
 | Risk of injury |
|
The memory function can be used when the key has been removed. For this reason, children should never be left unsupervised in the vehicle. They could otherwise become trapped when moving the seat or the steering wheel.
|
| Risk of accident |
|
Only use the memory
function on the driver's side when the vehicle is stationary. You could
otherwise be distracted from the traffic conditions by the steering wheel and
seat moving of their own accord, and cause an accident.
|
 |
| 1, 2, 3 | Storage position switches |
|
 |
Adjust the seat more.
|
| |
On the driver's side, also adjust the steering wheel more and the mirrors more.
|
| |
Press the M memory button.
|
| |
Press one of storage position switches 1, 2 or 3 within three seconds.
|
| |
The settings are stored in the selected preset position. A tone sounds when the settings have been completed.
|
Calling up a stored setting
| Risk of accident |
|
Only use the memory
function on the driver's side when the vehicle is stationary. You could
otherwise be distracted from the traffic conditions by the steering wheel and
seat moving of their own accord, and cause an accident.
|
| |
Press and hold the relevant storage position switch 1, 2 or 3 until the seat, steering wheel and mirrors are in the stored position.
|
 | |
|
The setting procedure is interrupted as soon as you release the storage position switch.
|
 | |
|
If you want to move the seat from the fully reclined position to a stored seat position, first raise the backrest using the seat switch. The seat could otherwise be damaged.
|
Storing a parking position
To make it easier to park, you can store the front-passenger side exterior mirror position in such a way that you can see the rear wheel on that side as soon as you engage reverse gear.
You can store a parking position for the exterior mirror on the front-passenger side using the memory button.
You will find information about using the exterior mirror's parking position in the "Parking aid" section more.
 |
 | Exterior mirror on the driver's side |
 | Exterior mirror on the front-passenger side |
 | Adjustment button |
 | Memory button |
|
| |
|
If the mirror moves out of position, repeat the steps. You can adjust the exterior mirror again after storing the setting.
|
