C-Class Interactive Owner's Manual

Driving and parking

Starting the engine

Risk of accident

Do not keep any objects in the driver's footwell. If you use a floormat or carpet in the driver's footwell, make sure that they are correctly secured and that there is sufficient clearance for the pedals.

Objects could otherwise get between the pedals in the event of sudden braking or acceleration. You may then no longer be able to brake, change gear or accelerate as intended. This may result in an accident and injury.

Risk of poisoning

Never leave the engine running in enclosed spaces. The exhaust gases contain carbon monoxide. Inhaling exhaust fumes constitutes a health hazard and could lead to loss of consciousness or even death.

Do not depress the accelerator pedal when starting the engine.

Manual transmission

  

Shift to neutral.

  

Depress the parking brake more.

Further information about the manual transmission more.

Automatic transmission*

PPark position with selector lever lock
RReverse gear
NNeutral
DDrive position
  

Before starting, make sure P is selected.

The engine can also be started when the selector lever is in position N.

Further information about the automatic transmission more.

Starting the engine with the key

Vehicles with automatic transmission*:

You can also use the "touch-start" function. To do this, turn the key to position 3 and release it immediately. The engine then starts automatically.

  

To start a petrol engine: turn the key to position 3 in the ignition lock more and release it as soon as the engine is running.

  

To start a diesel engine: turn the key to position 2 in the ignition lock more.

 

The preglow indicator lamp in the instrument cluster lights up.

  

When the preglow indicator lamp goes out, turn the key to position 3 and release it as soon as the engine is running.

 

You can start the engine without preglow if the engine is warm.

Starting the engine with KEYLESS GO*

Risk of injury

Your vehicle can be started using a valid KEYLESS GO key*. For this reason, children should never be left unsupervised in the vehicle. Always take the KEYLESS GO key* with you when leaving the vehicle, even if you are only leaving it for a short time.

The KEYLESS GO button can be used to start the vehicle without inserting the key in the ignition lock.

KEYLESS GO button
  

Depress the brake pedal.

 

The selector lever lock is released.

  

Petrol engine: press KEYLESS GO button once.

 

The engine starts automatically.

  

Diesel engine: press KEYLESS GO button once.

 

Preglow is activated and the engine starts automatically.

You can start the engine without preglow if the engine is warm:

  

Press and hold KEYLESS GO button until the engine is running.

 

Pulling away

Warm up the engine quickly. Do not use the engine's full performance until it has reached operating temperature.

Only shift into reverse gear when the vehicle is stationary.

Where possible, avoid spinning the drive wheels when pulling away on slippery roads. You could otherwise damage the drive train.

AMG vehicles: at low engine temperatures (below + 20 °C), the maximum engine speed is limited in order to protect the engine. Avoid driving at full throttle when the engine is cold in order to protect the engine and maintain smooth engine operation.

The vehicle locks centrally once you have pulled away. The locking knobs in the doors drop down.

You can open the doors from the inside at any time.

You can also deactivate the automatic locking feature more.

Manual transmission

  

Depress the clutch pedal.

  

Shift to either first or reverse gear.

  

Pull the parking brake release handle to release the parking brake.

  

Slowly release the clutch pedal and depress the accelerator pedal.

Change gear in good time and avoid spinning the wheels. You could otherwise damage the vehicle.

Automatic transmission*

It is only possible to move the selector lever to the desired position if you depress the brake pedal. Only then is the selector lever lock released.

  

Depress the brake pedal and hold it down.

  

Pull the parking brake release handle to release the parking brake.

  

Move the selector lever to position D or R.

 

Wait until the shift process is completed before pulling away.

  

Release the brake pedal.

  

Carefully depress the accelerator pedal.

 

Upshifts take place at higher engine speeds after a cold start. This helps the catalytic converter to reach its operating temperature more quickly.

Hill start assist

Hill start assist helps you when pulling away on uphill gradients. It holds the vehicle for a short time after you have removed your foot from the brake pedal. This gives you enough time to move your foot from the brake pedal to the accelerator pedal and depress it before the vehicle begins to roll.

Risk of accident

Never leave the vehicle when it is held by hill start assist. After approximately one second, hill start assist will no longer brake your vehicle and it could roll away.

  

Depress the brake pedal.

  

Pull away.

 

Once you have taken your foot off the brake pedal, the vehicle is held for around one second.

Hill start assist does not function if:

  • you are pulling away on a level road or a downhill gradient

  • on vehicles with automatic transmission*, the gear selector lever is in the N position

  • the vehicle is secured with the parking brake

  • ESP® is malfunctioning

 

Parking

Risk of accident

Only remove the key from the ignition lock when the vehicle is stationary since you cannot steer the vehicle with the key removed.

Never leave children unsupervised in the vehicle. They could release the parking brake. This could lead to a serious or fatal accident.

Risk of fire

Make sure that the exhaust system does not under any circumstances come into contact with easily ignitable material such as dry grass or petrol. The material could otherwise ignite and set the vehicle on fire.

Parking brake

Release handle
Parking brake
  

To release: depress the brake pedal and keep it depressed.

 

On vehicles with automatic transmission*, the selector lever lock is released.

  

Pull release handle .

  

The indicator lamp in the instrument cluster goes out.

  

To apply: depress parking brake firmly.

 

The indicator lamp in the instrument cluster lights up if the engine is running.

 

On steep slopes, turn the front wheels towards the kerb.

 

Switching off the engine

Risk of accident

If the engine is not running, there is no power assistance for the steering and brakes. Steering and braking then takes much more effort.

As a result, you might lose control of the vehicle, cause an accident and injure yourself and others.

Do not switch off the engine while driving.

Vehicles with manual transmission

  

Shift to either first or reverse gear.

  

Turn the key to position 0 in the ignition lock and remove it.

 

The immobiliser is activated.

Vehicles with automatic transmission*

  

Move the selector lever to P.

Using the key
  

Turn the key to position 0 more in the ignition lock and remove it.

 

The immobiliser is activated.

 

The key can only be removed when the selector lever is in position P.

Using KEYLESS GO*
  

Press the KEYLESS GO button more.

 

The engine stops and all the lamps in the instrument cluster go out more. The status of the on-board electronics corresponds to key position 1.