Seats
Points to remember
 | Risk of injury |
|
The seats can still be adjusted when there is no key in the ignition lock. For this reason, children should never be left unsupervised in the vehicle. They could become trapped when adjusting a seat.
|
| Risk of accident |
|
Only adjust the driver's seat when the vehicle is stationary. You will otherwise be distracted from the road and traffic conditions and you could lose control of the vehicle as a result of the seat moving. This could cause an accident.
|
| Risk of injury |
|
Make sure that nobody can become trapped when you adjust the seat.
Observe the notes concerning the airbag system.
Secure children as recommended; see "Children in the vehicle" section.
|
 | |
|
When you move the seats, make sure that there are no objects in the footwell or behind the seats. Otherwise, you could damage the seats and the objects.
|
 | |
|
The head restraints cannot be removed.
|
Adjusting the front-passenger seat from the driver’s seat
| Risk of injury |
|
When adjusting a front-passenger seat that is occupied, make sure that it is as far away from the front-passenger airbag as possible. The front passenger could otherwise sustain serious or fatal injuries in the event of an accident or braking manoeuvre.
Make sure that nobody can become trapped when adjusting the seat.
The front-passenger seat can be adjusted when there is no key in the ignition lock. For this reason, children should never be left unsupervised in the vehicle. They could become trapped if the seats move.
|
You can use the seat switches on the driver's side to adjust the front-passenger seat.
 |
 | To adjust the front-passenger seat |
|
 |
To activate/deactivate: press button .
|
If the indicator lamp in button is lit, you can access the following functions for the front-passenger seat:
Folding the front seat backrests forwards
 |
| Seat release lever |
|
In order to make it convenient for passengers to get in and out of the rear compartment, the front seat:
| |
|
The head restraint is lowered automatically when the seat release lever is pulled.
|
| Risk of injury |
|
Make sure that nobody can become trapped when moving the seat. If there is a risk of someone becoming trapped, press the seat adjustment switch on the door.
|
| |
|
Make sure that there are no objects in the footwell or behind the seats when adjusting the seats. You could otherwise damage the seats and the objects.
|
Folding the backrest forwards
| |
Pull seat release lever in the direction of the arrow and fold the backrest forwards.
|
| |
The head restraint is lowered and the seat moves forwards.
|
Folding back the backrest
| |
Fold the backrest back until it engages.
|
| |
The seat moves to its original position. The head restraint is raised. The backrest is engaged.
|
| Risk of injury |
|
Make sure that the backrest engages fully. The seat belt will not work if the backrest is not engaged. If the backrest is not engaged, the message Front right seat backrest not locked or Front left seat backrest not locked appears in the multi-function display. Stop the vehicle as soon as road and traffic conditions permit and remove any objects that are blocking the backrest.
|
Lumbar support
You can adjust the lumbar support using COMAND more.
Multi-contour seat*
You can adjust the multi-contour seat using COMAND more.
Active multicontour seat*
You can adjust the
active multi-contour seat using COMAND
more.
| |
|
If PRE-SAFE®
has been activated, the air pressure in the air chambers (the side cushions of
the seat cushion and backrest) of the multi-contour seat* or active multi-contour seat* is increased.
|
Rear seats
Head restraints in the rear compartment
| Risk of injury |
|
On a seat which is occupied, pull the head restraint up into the upright position. This reduces the risk of injury to the passenger in the event of an accident.
|
| Risk of injury |
|
Make sure that nobody can become trapped when folding the head restraints up or back.
|
Folding back
You can use the button in the centre console to fold the head restraints up or back.
 |
| To fold back the rear seat head restraints |
|
| |
Make sure that the key is in position 1 or 2 in the ignition lock.
|
| |
Briefly press button .
|
| |
The rear-compartment head restraints are folded back.
|
Folding into position* pneumatically
When a passenger in the rear compartment engages the seat belt, the head restraint of that seat folds into position automatically.
| |
Press and hold button until the head restraints have folded into position.
|
Folding into position manually
| |
Pull the head restraint up until it engages.
|
| Risk of injury |
|
Make sure that the head restraints engage fully. Otherwise, the back of the rear passenger's head is not supported in the event of a rear collision. As a result, the passenger could be injured.
|
Seat heating
The three red indicator lamps in the button indicate the heating level you have selected.
 |
| Seat heating |
|
| |
|
The system automatically switches down from level 3 to level 2 after approximately five minutes.
The system automatically switches down from level 2 to level 1 after approximately ten minutes.
The system automatically switches off approximately 20 minutes after it is set to level 1.
|
| |
|
If the battery voltage is too low, the seat heating may switch off.
|
