Memory function
Storing settings
You can store up to three different settings using the memory button.
The following settings are stored as a single memory preset:
-
seat, backrest, head restraint position and contour of the backrest in the lumbar region
-
active multi-contour seat*: activation/deactivation
-
multi-contour seat*: the side bolsters of the backrest and contour of the backrest in the lumbar and shoulder regions
-
driver's side: steering-wheel position
-
driver's side: position of the exterior mirrors on the driver's and front-passenger sides
 | Risk of injury |
|
The memory function can be used when the key has been removed. For this reason, children should never be left unsupervised in the vehicle. They could otherwise become trapped when moving the seat or the steering wheel.
|
| Risk of accident |
|
Only use the memory
function on the driver's side when the vehicle is stationary. You could
otherwise be distracted from the traffic conditions by the steering wheel and
seat moving of their own accord, and cause an accident.
|
 |
| 1, 2, 3 | Storage position switches |
|
 |
Adjust the seat more.
|
| |
On the driver's side, also adjust the steering wheel more and the mirrors more.
|
| |
Press the M memory button.
|
| |
Press one of storage position switches 1, 2 or 3 within three seconds.
|
| |
The settings are stored in the selected storage position.
|
Calling up a stored setting
| Risk of accident |
|
Only use the memory
function on the driver's side when the vehicle is stationary. You could
otherwise be distracted from the traffic conditions by the steering wheel and
seat moving of their own accord, and cause an accident.
|
| |
Press and hold the relevant storage position switch 1, 2 or 3 until the seat, steering wheel and mirrors are in the stored position.
|
 | |
|
If you release the storage position switch, the seat, steering wheel and mirror setting functions stop immediately. The multi-contour seat* setting or the lumbar support adjustment are still carried out.
|
 | |
|
ARKI Themenmodule "Vorsicht" nicht gefunden!
|
Storing a parking position
To make it easier to park, you can store the front-passenger side exterior mirror position in such a way that you can see the rear wheel on that side as soon as you engage reverse gear.
You can store a parking position for the exterior mirror on the front-passenger side using the memory button.
You will find information about using the exterior mirror's parking position in the "Parking aid" section more.
 |
 | Memory button M |
 | Adjustment button |
 | Exterior mirror on the front-passenger side |
 | Exterior mirror on the driver's side |
|
| |
|
If the mirror moves out of position, repeat the steps. You can adjust the exterior mirror again after storing the setting.
|
