CL - Interactive Owner's Manual [In depth | Practical advice

Warning triangle

resources/font_symbols/mbsymb5/mbsymb5_0031.png

Warning triangle

resources/font_symbols/mbsymb5/mbsymb5_0032.png

Catch

	Turn lever 90° in the direction of the arrow.
	Remove warning triangle .

Setting up the warning triangle

Retainer

Side reflectors

resources/font_symbols/mbsymb5/mbsymb5_0033.png

Feet

	Fold feet down and out to the side.
	Pull side reflectors upwards to form a triangle and lock them at the top using retainer .

First-aid kit


Check the expiry date of the first-aid kit annually, and replace the contents if necessary.

Retainer strap

First-aid kit

	Release retainer strap .
	Remove first-aid kit from the luggage net.

Fire extinguisher*

Have the fire extinguisher refilled after each use and checked every one or two years. Otherwise, it may fail in an emergency.

Observe the legal requirements in all countries concerned.

Handle

Cover

	Pull handle upwards.
	Pull cover forwards in the direction of the arrow.
	Remove the fire extinguisher from the stowage compartment.

Vehicle tool kit and jack

The vehicle tool kit and the jack are located under the inner floor of the boot.

Risk of injury

The jack is designed only to raise and hold the vehicle for a short time while a wheel is being changed.

If you are carrying out work on the vehicle, you must use stands.

Make sure that the jack is placed on a firm, non-slip and level surface. Do not use wooden blocks or similar objects as a jack underlay. Otherwise, the jack will not be able to achieve its load-bearing capacity due to the restricted height.

Do not start the engine at any time while a wheel is being changed.

Do not lie under the vehicle when it is being supported by the jack. If you do not raise the vehicle as described, it could slip off the jack (e.g. if the engine is started or a door or the boot lid is opened or closed) and you could be seriously injured.