Memory functions*
Storing settings
You can store up to three different settings using the memory button.
The following settings are stored as a single memory preset:
-
Position of the seat, backrest and head restraint.
-
Driver's side: steering-wheel position
-
Driver's side: exterior mirror position
 | Risk of accident |
|
Only activate the memory function on the driver's side when the vehicle is stationary. You could otherwise be distracted as a result of the steering wheel or seat moving unexpectedly.
|
 |
Make sure that the key is in position 2 in the ignition lock.
|
| |
Adjust the seat more.
|
| |
On the driver's side, also adjust the steering wheel more and the mirrors more.
|
| |
Turn storage position switch  to desired storage position 1, 2 or 3.
|
| |
Press the M memory button.
|
| |
Press storage position switch within three seconds.
|
| |
The settings are stored in the selected storage position.
|
Calling up a stored setting
| Risk of accident |
|
Only activate the memory function on the driver's side when the vehicle is stationary. You could otherwise be distracted as a result of the steering wheel or seat moving unexpectedly.
|
 | |
|
The setting procedure is interrupted as soon as you release the storage position switch.
|
 | |
|
If you want to move the seat from the fully reclined position to a stored seat position, first raise the backrest using the seat switch. The seat could otherwise be damaged.
|
Storing a parking position
To make it easier to park, you can store the front-passenger side exterior mirror position in such a way that you can see the rear wheel on that side as soon as you engage reverse gear.
You can store one parking position for the exterior mirror on the front-passenger side using the memory button.
You will find information about using the exterior mirror's parking position in the "Parking aid" section more.
| |
Make sure that the vehicle is stationary and that the key is in position 2 in the ignition lock.
|
| |
Press the button for the exterior mirror on the front-passenger side.
|
| |
The front-passenger side exterior mirror is selected.
|
| |
Use button to adjust the exterior mirror to a position which allows you to see the rear wheel and the kerb.
|
| |
Press M memory button  .
|
| |
Press one of the arrows on adjustment button within three seconds.
|
| |
The parking position is stored if the exterior mirror does not move.
|
| |
|
If the mirror does move, repeat the steps. You can adjust the exterior mirror again after storing the setting.
|
