Points to remember

The on-board computer is activated as soon as the key is turned to position 1 in the ignition lock. You can use the on-board computer to call up information relating to your vehicle and to make and adjust settings.

You can call up the next service due date, select the display language for the instrument cluster and set other functions.

The on-board computer shows information in the multi-function display.

Multi-function steering wheel

You can control the multi-function display and the settings in the on-board computer with the buttons on the multi-function steering wheel.

	Multi-function display
	Selects submenus in the Settings menu Changes values Adjusts the volume
	Accepts or rejects a call*
	Selecting menus: scrolls forwards or back
	Scrolls forwards or back within a menu

Several functions are combined thematically in the menus.

For example, the Audio menu contains functions for operating the radio or CD player. The functions can be used to either look up information or to change settings for your vehicle.

You can think of the configuration of the menus and the functions within a menu as a circle:

Unlike other menus, the Settings menu contains a number of submenus more.

The number of menus depends on the equipment in your vehicle.

Multi-function display

The multi-function display shows you values and settings as well as any display messages that may have been generated.

Display area for menus or submenus Status bar with outside temperature or speed more Trip meter

Menus and submenus

	Function
	Basic display menu more Digital speedometer (The sequence of the digital speedometer and the outside temperature display depends on the settings in the "Basic display" submenu.) more Tyre pressure loss warning system more Outside temperature more ASSYST service display more Engine oil level* more
	AMG* menu more
	Audio menu more Radio station more CD player or CD changer* more
	Navigation* menu (NAV) more
	Distronic* menu (distance display) more
	Message memory menu (This menu is only visible if there is a display message available.) (fault and warning messages) more
	Settings menu more Resetting to factory settings more Selecting a submenu more
	Trip computer menu more Consumption statistics more Range more
	Telephone* menu more

This is what the displays look like when you scroll through the menus.

The generic terms in the table overview are intended to help you navigate through the menus. The terms themselves are not always displayed in the multi-function display.

For the Audio 20, the on-board computer displays the Audio and Telephone* menus in English. The language for these menus is not dependent on the language selected for the multi-function display.

In vehicles equipped with Audio 50 APS and COMAND APS*, the Audio*, Navigation* and Telephone* menus are slightly different. The examples given in this Owner's Manual apply to vehicles equipped with COMAND APS*.

Standard display menu

Use the buttons on the multi-function steering wheel.

Outside temperature Trip meter

Basic display

You can display the digital speedometer instead of outside temperature  more.

You can select the following functions in the Basic display menu by pressing the or button:

• digital speedometer

  (The sequence of the digital speedometer and the outside temperature display depends on the settings in the "Basic display" submenu.)

• tyre pressure loss warning system more

• outside temperature

• ASSYST service display more

• engine oil level* more

Displaying the digital speedometer or outside temperature

You can use the Basic display submenu more to select whether the first function listed in the Basic display menu is the digital speedometer or the outside temperature.

Digital speedometer Status line with outside temperature Trip meter

Illustration showing the digital speedometer displayed

AMG* menu

These functions are only available on AMG vehicles.

Use the buttons on the multi-function steering wheel.

Gear indicator Upshift instruction Engine oil temperature

In the manual gearshift program, the menu is displayed in red when the engine reaches the overrevving range. You will also see shift up instruction . Shift up blocks other messages in the multi-function display until you have shifted up.

The engine oil temperature gauge flashes if the engine oil temperature has not reached 80 . Avoid driving at full engine output during this time.

Displaying the on-board voltage

Gear indicator On-board voltage

RACETIMER

The RACETIMER allows time measurements to be saved.

While you have the RACETIMER displayed, you will not be able to adjust the volume using the and buttons.

Gear indicator RACETIMER Lap

You can start the RACETIMER when the engine is running or if the key is in position 2 in the ignition lock.

The RACETIMER interrupts timing when you stop the vehicle and turn the key to position 1 in the ignition lock. When you turn the key to position 2 or 3 and then press the button, timing is continued.

Storing the lap time and starting a new lap

It is possible to store a maximum of nine laps.

Gear indicator RACETIMER Fastest lap time (best lap) Lap

Resetting the current lap

Deleting all laps

If you have switched off the engine, the RACETIMER is reset to "0" after 30 seconds. All laps are deleted.

It is not possible to delete a single stored lap on its own.

Overall evaluation

This function is only available if you have stored at least one lap and have stopped the RACETIMER.

RACETIMER overall evaluation Total time driven Top speed Distance covered Average speed

Lap evaluation

This function is only available if you have stored at least two laps and have stopped the RACETIMER.

Lap Lap time Top speed during lap Lap length Average lap speed

Audio menu

Use the functions in the Audio menu to operate the audio equipment or COMAND APS*. If the audio equipment or COMAND APS* is switched off, the multi-function display shows the AUDIO OFF message (Audio  50 APS* and COMAND APS*: Audio off).

Audio 50 APS*: this menu is displayed in English if the language is set to Russian.

Use the buttons on the multi-function steering wheel.

Selecting a radio station

You can only store new stations using the audio systemor COMAND APS*. Please refer to the separate operating instructions for notes on how to do this.

Waveband (preset number, only if the channel is stored) Station

Operating the CD player or CD changer*

You can only play MP3 CDs in the drive of the CD changer*.

Current CD (for CD changer*) Current track

Audio 20 display

Current CD (for CD changer*) Current track

Display for Audio 50 APS* and COMAND APS*

Navigation* menu

In the Navigation menu, the multi-function display shows information from the navigation system.

Audio 50 APS*: this menu is displayed in English if the language is set to Russian.

Use the buttons on the multi-function steering wheel.

Route guidance inactive

The multi-function display shows the direction of travel, e.g. heading NE.

Route guidance active

The following may appear in the multi-function display:

Distronic* menu

You can see the current Distronic settings in the Distronic menu more.

Message memory menu

Previous display messages can be called up in the Message memory menu. You will only see the Message memory menu if there are any display messages.

Switching off the ignition clears the Message memory except for the highest priority display messages. The on-board computer will delete these display messages only after the reason for the message has been rectified.

Displaying messages

Use the buttons on the multi-function steering wheel.

Settings menu

In the Settings menu you can use the To reset: Press reset button for 3 seconds function to restore most settings to the factory settings. And there are submenus via which you can make individual settings for your vehicle.

Use the buttons on the multi-function steering wheel.

Resetting to factory settings

For safety reasons, not all functions are reset: permanent Speedtronic can only be set in the Vehicle submenu. The Headlamp mode function in the Lighting submenu is only reset if the vehicle is stationary.

Submenus in the Settings menu

The following tables show the settings you can make in the individual submenus. You will find additional information on the pages shown.

Instrument cluster submenu
Unit of measurement for distance more Language more Status line display more Basic display (standard display) more

Time/date submenu (This function is not available on vehicles with Audio 50 APS* or COMAND APS*.)
Time and date more

Lighting submenu
Constant headlamp mode more Surround lighting more Exterior lighting delayed switch-off more Interior lighting delayed switch-off more

Vehicle submenu
Permanent Speedtronic more Radio station selection more Automatic locking feature more

Heating* submenu
Selecting the switch-on time for the auxiliary heating* more Changing the switch-on time for the auxiliary heating* more

Convenience submenu*
Easy-entry/exit feature* more Folding in the exterior mirrors when locking the vehicle* more

Selecting the unit of measurement for distance

The selected unit of measurement for distance applies to:

• the total distance recorder and the trip meter

• the trip computer

• the digital speedometer

  (Vehicles for the United Kingdom: the digital speedometer always displays km/h.)

• cruise control

• Speedtronic

• Distronic*

Selecting the language

Selecting the status line display

Vehicles for the United Kingdom: this function is not available.

Selecting the basic display (standard display)

Vehicles for the United Kingdom: this function is not available.

You will see either the outside temperature or the digital speedometer first in the basic display, depending on the setting. You will see the display that is not selected when you scroll through the Basic display menu more.

Setting the date and time

A:

Audio 20

B:	Audio 50 APS*

C:	COMAND APS*

Depending on the audio system fitted, the time and date are received from GPS satellites and therefore cannot be set using the on-board computer; see the following table.

	A	B	C
Set using the on-board computer	X
Automatic GPS satellite reception		X	X
Set the time zone just once; see the separate operating instructions		X	X

Setting the time

Setting the date

Setting constant headlamp mode

If you have selected constant headlamp mode and the light switch is set to the or position, the side lamps, dipped-beam headlamps and licence plate lighting switch on automatically when the engine is running. Turning the light switch to a different position switches on the corresponding lights. Make sure the light switch is set to or if you switch off the constant headlamp mode while driving at night.

In countries in which constant headlamp mode is a legal requirement, Constantis the factory setting.

Switching the surround lighting on or off

If the surround lighting is switched on, the following lights will be switched on automatically in the dark after you have unlocked the vehicle using the key:

• the side lamps

• the tail lamps

• the licence plate lighting

• the front foglamps

The surround lighting switches off automatically if you open the driver's door or after 40 seconds.

Activating or deactivating the exterior lighting delayed switch-off

Using the Headlamps delayed switch-off function, you can set whether the exterior lighting should remain on for 15 seconds after the doors are closed when it is dark. If none of the doors are opened after the engine is switched off or if an open door is not closed, the exterior lighting goes out after 60 seconds.

When you have set a delayed switch-off time and then switch off the engine, the following remain lit:

• the side lamps

• the tail lamps

• the licence plate lighting

• the front foglamps

You can reactivate this function by opening a door within 10 minutes.

To temporarily deactivate the delayed switch-off:

Delayed switch-off is reactivated as soon as you restart the engine.

Activating or deactivating the interior lighting delayed switch-off

Using the Interior lighting delayed switch-off function, you can set whether the interior lighting should remain on for 10 seconds after the key is removed from the ignition lock when it is dark.

Setting the radio station selection

You can use the Audio Search function to set whether a new station is to be searched for or whether a stored station is to be selected every time you operate the radio*. If the Frequenc. setting is selected, the station search is started. If the Memory setting is selected, the next stored station is selected.

Activating/deactivating the automatic door locking feature

The Automatic door locking feature allows you to set whether your vehicle will lock centrally from a speed of about 15 km/h upwards.

Selecting the switch-on time for the auxiliary heating*

This function is only available if the vehicle has an auxiliary heating system.

The Auxiliary heat. function allows you to select three switch-on times. You can set the exact switch-on time using the other functions in the Heater submenu.

You can switch off the auxiliary heating by using the remote control or the auxiliary heating button on the centre console.

The auxiliary heating is switched off automatically after 50 minutes. This time can be changed. To do this, visit a qualified specialist workshop, e.g. a Mercedes-Benz Service Centre.

You can call up the Auxiliary heat. function directly.