CLK Coupé - Interactive Owner's Manual
Keywords
Introduction
At a glance
Safety
Controls
Opening and closing
Key positions
Seats
Steering wheel
Mirrors
Memory functions*
Seat belts
Lights
Windscreen wipers
Side windows
Driving and parking
Transmission
Instrument cluster
On-board computer
Driving systems
Air conditioning
Sliding/tilting sunroof* (Coupé)
Opening and closing the soft top (Cabriolet)
Loading and stowing
Features
Operation
Practical advice
Technical data

Memory functions*

Quick Access

Storing settings
Calling up a stored setting
Storing a parking position

Storing settings

You can store up to three different settings using the memory button.

The following settings are stored as a single memory preset:

  • Position of the seat, backrest and head restraint

  • Driver's side: steering-wheel position

  • Driver's side: position of the exterior mirrors on the driver's and front-passenger sides

Risk of accident

Only use the memory function on the driver's side when the vehicle is stationary. You could otherwise be distracted from the traffic conditions by the steering wheel and seat moving of their own accord, and cause an accident.
Memory button M
Storage position switch
  

Make sure that the key is in position 2 in the ignition lock.
  

Adjust the seat more.
  

On the driver's side, also adjust the steering wheel more and the mirrors more.
  

Turn storage position switch to desired storage position 1, 2 or 3.
  

Press memory button M .
  

Press storage position switch within three seconds.
 

The settings are stored in the selected storage position.
 

Calling up a stored setting

Risk of accident

Only use the memory function on the driver's side when the vehicle is stationary. You could otherwise be distracted from the traffic conditions by the steering wheel and seat moving of their own accord, and cause an accident.
  

Turn storage position switch to the desired storage position.
  

Press storage position switch until the seat, steering wheel and mirrors are in the stored position.

The setting procedure is interrupted as soon as you release the storage position switch.

If you want to move the seat from the fully reclined position to a stored seat position, first raise the backrest using the seat switch. The seat could otherwise be damaged.
 

Storing a parking position

To make it easier to park, you can store the front-passenger side exterior mirror position in such a way that you can see the rear wheel on that side as soon as you engage reverse gear.

You can store a parking position for the exterior mirror on the front-passenger side using the memory button.

You will find information about using the exterior mirror's parking position in the "Parking aid" section more.

Memory button M
Adjustment button
Exterior mirror on the front-passenger side
  

Make sure that the vehicle is stationary and that the key is in position 2 in the ignition lock.
  

Press button for the exterior mirror on the front-passenger side.
  

Use button to adjust the exterior mirror to a position which allows you to see the rear wheel and the kerb.
  

Press memory button M .
  

Press one of the arrows on adjustment button within three seconds.
 

The parking position is stored if the exterior mirror does not move.

If the mirror moves out of position, repeat the steps. You can adjust the exterior mirror again after storing the setting.