CLS - Interactive Owner's Manual

Replacing the wiper blades

Quick Access

Removing
Fitting
Risk of accident

The windscreen will not longer be properly wiped if the wiper blades are worn. This could prevent you from observing the traffic conditions, thereby causing an accident. Replace the wiper blades twice a year, ideally in spring and autumn.

Risk of accident

The wiper arms could start moving and cause an injury if you leave the windscreen wipers switched on.

Remove the key from the ignition lock before replacing the wiper blades.

Make sure that you touch only the wiper arm of the windscreen wiper to avoid damaging the windscreen wiper blades.

Removing

Vehicles without KEYLESS GO*

  

Make sure that the key is in position 1 or 2 in the ignition lock.

  

Set the windscreen wipers to position  more on the combination switch.

  

When the wiper arms have reached a vertical position, turn the key to position 0 and remove it from the ignition lock.

  

Fold the wiper arm away from the windscreen until it engages.

  

Set the wiper blade at right angles to the wiper arm.

Vehicles with KEYLESS GO*

  

Switch off the engine.

  

Take your foot off the brake pedal.

  

Set the windscreen wipers to position  more on the combination switch.

  

Press the KEYLESS GO button repeatedly until the windscreen wipers start.

  

When the wiper arms have reached a vertical position, press the KEYLESS GO button again.

  

Fold the wiper arm away from the windscreen until it engages.

  

Set the wiper blade at right angles to the wiper arm.

  

Remove the wiper blade from the retainer on the wiper arm in the direction of the arrow.

 

Fitting

  

Slide the new wiper blade into the retainer on the wiper arm in the opposite direction to the arrow.

  

Turn the wiper blade parallel to the wiper arm.

  

Fold the wiper arm back onto the windscreen.