 |
 |
|
|
| Automatic air distribution and airflow control, right Plus automatic blower output. |
| Air distribution, right Make settings by turning the outer rotary control. |
| Rear window heating |
| Cooling off / on If the cooling function is switched off then the air in the vehicle is neither cooled nor dehumidified. |
| Display Shows the temperatures selected for the left and right-hand sides, the air distribution and the airflow, as well as automatic control if this has been selected. |
| Increases / reduces the temperature, right The temperature selected is shown in the centre of the display. |
| Controls the rear-compartment air conditioning from the front. |
| Increases the airflow The level selected is shown in the display. |
| Activates / deactivates 4-zone THERMOTRONIC To activate, press this or any other button. |
| Reduces the airflow The level selected is shown in the display. |
| Residual heat It is possible to make use of the residual heat of the engine to continue heating the stationary vehicle for up to 30 minutes after the engine has been switched off. |
| Increases / reduces the temperature, left The temperature selected is shown in the centre of the display. |
| Demisting the windows Pressing the button increases the temperature and the blowers run at full output. By pressing again, the previous level is restored. |
| Air-recirculation mode Air-recirculation mode switches on automatically at high outside temperatures. |
| Automatic air distribution and airflow control, left Plus automatic blower output. |
| Air distribution, left Make settings by turning the outer rotary control. |
|
