Locking/unlocking in an emergency
Emergency key
If the vehicle can no longer be unlocked or locked with the key or the KEYLESS GO key*, use the emergency key element.
If you use the emergency key element to unlock and open the driver's door or the boot lid (Saloon), the anti-theft alarm system* will be triggered more.
There are several ways to turn off the alarm:
|
Press the or button on the key.
|
or |
|
Insert the key into the ignition lock.
|
or |
|
Press the KEYLESS GO button* on the selector lever. The KEYLESS GO key* must be in the vehicle.
|
or |
|
Lock or unlock the vehicle using KEYLESS GO*. The KEYLESS GO key* must be outside the vehicle.
|
Releasing and removing the emergency key element
 |
 | Release catch |
 | Emergency key element |
|
Unlocking the vehicle
If the vehicle can no longer be unlocked centrally with the key
or the KEYLESS GO key*:
|
Remove the
emergency key element from the key
more.
|
 |
 | To
unlock |
|
|
Insert the
emergency key element into the lock of the driver's door as far as it will
go.
|
|
Turn the emergency
key element anti-clockwise to position .
|
| |
The door is
unlocked.
|
| |
 | |
|
On
right-hand-drive vehicles, turn the emergency key element clockwise.
|
|
|
Turn the emergency
key element back and remove it.
|
Locking the vehicle
If the vehicle can no longer be locked centrally with the key or
the KEYLESS GO key*:
|
Open the driver's
door.
|
|
Close the
front-passenger door, the rear doors and the boot lid/tailgate.
|
|
Press the locking
button
more.
|
|
Check
whether the locking knobs on the doors are still visible. Press the locking
knobs down manually if necessary.
|
|
Close the driver's
door.
|
|
Remove the
emergency key element from the key
more.
|
 |
 | To
lock |
|
|
Insert the
emergency key element into the lock of the driver's door as far as it will
go.
|
|
Turn the emergency
key element clockwise as far as it will go to position
.
|
| |
 | |
|
On
right-hand-drive vehicles, turn the emergency key element
anti-clockwise.
|
|
|
Turn the emergency
key element back and remove it.
|
|
Check whether the
doors and the boot lid/tailgate are locked.
|
Opening/closing the boot
To unlock the boot
 | |
|
The boot lid swings upwards when opened. Therefore, make sure that there is enough space above the boot lid.
|
If the boot can no longer be unlocked with the key or the KEYLESS GO key*:
|
Remove the emergency key element from the key more.
|
 |
 | To unlock the boot |
|
Boot lock
|
Insert the emergency key element fully into the boot lock.
|
|
Turn the emergency key element anti-clockwise as far as it will go to position and pull the boot lid handle.
|
| |
The boot is unlocked.
|
|
Turn the emergency key element back and remove it.
|
Opening the boot manually (remote boot lid closing feature*)
 |
 | Handle |
|
To open the boot lid
|
Lift the boot lid by handle .
|
Closing the boot manually (remote boot lid closing feature*)
 | Risk of injury |
|
Make sure that nobody can become trapped as you close the boot lid.
|
 | |
|
Do not leave the key in the boot. You could otherwise lock yourself out.
|
 |
 | Recess |
|
To close the boot lid
|
Pull the boot lid down using recess .
|
|
If necessary, close the boot lid from the outside by pushing down the edge.
|
Releasing the parking lock manually
In the event of an
electrical fault, it is possible to release the selector lever lock manually to
move it out of position P, e.g. if you wish to tow the vehicle
away.
 |
 | Screwdriver or similar
implement |
|
Releasing the parking lock
manually
|
Open the stowage
compartment in the centre console.
|
|
Remove cup
holder*.
|
|
Hold the cover open
at an angle of approximately 45 °.
|
|
Insert a
screwdriver or similar implement into the opening.
|
|
Press
implement
downwards and simultaneously move the selector lever out of position
P.
|
|
Remove
implement .
|
| |
The selector lever
can now be moved freely until it is returned to
position P.
|