Memory functions*
Storing settings
You can store up to three different settings using the memory button.
The following settings are stored as a single memory preset:
-
position of the seat, backrest and head restraint
-
driver's side: steering-wheel position
-
driver's side: position of the exterior mirrors on the driver's and front-passenger sides
 | Risk of injury |
|
The memory function can still be used when the key has been removed. For this reason, children should never be left unsupervised in the vehicle. They could otherwise become trapped when moving the seat or the steering wheel.
|
| Risk of accident |
|
Only use the memory function on the driver’s side when the vehicle is stationary. You could otherwise be distracted from the traffic conditions by the steering wheel and seat moving of their own accord, and cause an accident.
|
 |
| 1, 2, 3 | Storage position switches |
|
 |
Adjust the seat more.
|
| |
On the driver's side, also adjust the steering wheel more and the mirrors more.
|
| |
Press the M memory button.
|
| |
Press one of storage position switches 1, 2 or 3 within three seconds.
|
| |
The settings are stored in the selected preset position. A tone sounds when the settings have been completed.
|
Calling up a stored setting
| Risk of accident |
|
Only use the memory function on the driver’s side when the vehicle is stationary. You could otherwise be distracted from the traffic conditions by the steering wheel and seat moving of their own accord, and cause an accident.
|
| |
Press and hold the
relevant storage position switch 1, 2 or 3 until the
seat, steering wheel and mirrors are in the stored
position.
|
 | |
|
The
setting procedure is interrupted as soon as you release the storage position
switch.
|
 | |
|
ARKI Themenmodule "Vorsicht" nicht gefunden!
|
Passenger side exterior mirror parking position
To make it easier to park, you can set and store the front-passenger side exterior mirror position in such a way that you can see the rear wheel on that side as soon as you engage reverse gear.
Adjusting and storing the exterior mirror parking position
 |
 | Adjustment button |
 | Exterior mirror on the front-passenger side |
 | Exterior mirror on the driver's side |
|
| |
Make sure that the vehicle is stationary and that the key is in position 2 in the ignition lock.
|
| |
Press button for the exterior mirror on the front-passenger side.
|
| |
Engage reverse gear.
|
| |
The exterior mirror on the front-passenger side moves to the preset parking position.
|
| |
Use adjustment button to adjust the exterior mirror to a position which allows you to see the rear wheel and the kerb.
|
| |
The parking position is stored.
|
| |
|
When you shift the automatic transmission into another gear, the exterior mirror on the front-passenger side returns to the driving position.
|
Calling up a stored parking position setting
| |
With the key in position 2 in the ignition lock and with exterior mirror on the front-passenger side activated, engage reverse gear.
|
| |
Exterior mirror on the front-passenger moves to the stored parking position.
|
The exterior mirror on the front-passenger side moves back to its original position:
-
as soon as you exceed a speed of 10 km/h
-
about ten seconds after you have disengaged reverse gear
-
if you press button for the exterior mirror on the driver's side
