| |
|
|
|
|
|
 |
 |
1 |
Draught stop |
2 |
Press-stud fastener |
3 |
Retainer loop |
4 |
Securing pin |
5 |
Gap |
|
|
Draught stop
The draught stop provides protection from the wind when you are driving with the roof open.
To fit the draught stop, hang retainer loop 3 on securing pin 4.
Press the press-stud fasteners 2 on the draught stop onto their counterparts and pull draught stop 1 over the roll-over bars.
Make sure that the lower edge of the draught stop is routed into gap 5 between the stowage compartment and the rear wall.
|
|
|
|
 |
3 / 4 |
 |
|
|
| |
|
|
