Driving safety systems
In this section, you will find information about the following driving safety systems:
-
ABS (Anti-lock Braking System)
-
BAS (Brake Assist System)
-
ESP® (Electronic Stability Program)
 | |
|
In wintry road conditions, always use winter tyres (M+S tyres) and, where necessary, snow chains. Only in this way will the driving safety systems described in this section work as effectively as possible.
|
 | Risk of accident |
|
The risk of an accident is significantly increased by driving too fast. This is particularly the case when cornering on wet and slippery roads and when driving too close to the vehicle in front.
The driving safety systems described in this section cannot reduce this risk or override the laws of physics.
For this reason, always adapt your driving style to suit the prevailing road and weather conditions. Maintain sufficient distance from other road users and objects on the road.
|
ABS (Anti-lock Braking System)
ABS regulates brake pressure in such a way that the wheels do not lock when you brake. This allows you to continue steering the vehicle when braking.
ABS works from a speed of about 8 km/h upwards, regardless of road surface conditions. ABS works on slippery surfaces, even when you only brake gently.
| Risk of accident |
|
Do not depress the brake pedal several times in quick succession (pumping). Depress the brake firmly and evenly. Pumping the brake pedal reduces the braking effect.
|
Braking
If ABS intervenes when braking, you will feel a pulsing in the brake pedal.
If ABS intervenes:
 |
Continue to depress the brake pedal with force until the braking situation is over.
|
For full braking application:
| |
Depress the brake pedal with maximum force.
|
| Risk of accident |
|
If ABS is faulty, the wheels could lock when braking. This limits the steerability of the vehicle when braking and the braking distance may increase.
If ABS is deactivated due to a malfunction, then BAS and ESP are also deactivated. The risk of your vehicle skidding is then increased in certain situations.
You should therefore always adapt your driving style to suit the prevailing road and weather conditions.
|
BAS (Brake Assist)
BAS operates in emergency braking situations. If you depress the brake pedal quickly, BAS automatically boosts the braking force, thus shortening the stopping distance.
| |
Keep the brake pedal firmly depressed until the emergency braking situation is over.
|
| |
ABS prevents the wheels from locking.
|
The brakes will function as usual once you release the brake pedal. BAS is deactivated.
| Risk of accident |
|
If BAS has malfunctioned, the braking system remains available with full brake boosting effect. However, braking force is not automatically increased in emergency braking situations and the stopping distance may increase.
|
ESP® (Electronic Stability Program)
ESP® monitors driving stability and traction, i.e. power transmission between the tyres and the road surface.
If ESP® detects that the vehicle is deviating from the direction desired by the driver, one or more wheels are braked to stabilise the vehicle. The engine output is also modified, if necessary, to keep the vehicle on the desired course within the scope of the laws of physics. ESP® assists the driver when pulling away on wet or slippery roads. ESP® can also stabilise the vehicle during braking.
When ESP® intervenes, the 
warning lamp flashes in the instrument cluster.
| Risk of accident |
|
If the
warning lamp in the instrument cluster flashes, proceed as follows:
-
Do not deactivate ESP® under any circumstances.
-
Only depress the accelerator pedal as far as necessary when pulling away.
-
Adapt your driving style to suit the prevailing road and weather conditions.
The vehicle could otherwise go into a skid.
ESP® cannot reduce the risk of an accident if you drive too fast. ESP® cannot override the laws of physics.
|
 | |
|
The ignition must be switched off (key in position 0 or I in the ignition lock) if:
Application of the brakes by ESP® could otherwise destroy the brake system on the front or rear axle.
|
| |
|
Only use wheels with the recommended tyre sizes. Only then will ESP® function properly.
|
To deactivate/activate ESP®
ESP® is activated automatically when the engine is running.
It may be best to deactivate ESP® in the following situations:
-
when using snow chains
-
in deep snow
-
on sand or gravel
| Risk of accident |
|
Activate ESP® as soon as the situations described above no longer apply. ESP® will otherwise not be able to stabilise the vehicle if the vehicle starts to skid or a wheel starts to spin.
|
If you deactivate ESP®:
-
ESP® no longer improves driving stability
-
Engine torque is not limited and the drive wheels are able to spin. The spinning wheels produce a cutting effect for better traction.
-
traction control is still activated.
-
ESP® still provides support when you brake.
| |
|
If ESP® is deactivated and one or more wheels start to spin, the warning lamp in the instrument cluster flashes. ESP® does not, stabilise the vehicle.
|
 |
 | To deactivate/activate ESP® |
|
| Risk of accident |
|
ESP® is deactivated if the
warning lamp in the instrument cluster lights up continuously when the engine is running. The risk of your vehicle skidding is then increased in certain situations.
You should therefore always adapt your driving style to suit the prevailing road and weather conditions.
|
