Anti-theft systems
Immobiliser
The immobiliser prevents your vehicle from being started without the correct key.
 |
To activate: remove the key from the ignition lock.
|
| |
To deactivate: turn the key to position 2 in the ignition lock.
|
ATA* (anti-theft alarm system)
A visual and audible alarm is triggered if the alarm system is primed and you open:
The alarm is not switched off even if you close an open door again.
 |
 | Indicator lamp |
|
| |
To prime: lock the vehicle using the key.
|
| |
Indicator lamp flashes. The alarm system is primed after approximately 15 seconds.
|
| |
To deactivate: unlock the vehicle using the key.
|
Switching off the alarm
| |
Insert the key into the ignition lock.
|
| |
The alarm is switched off.
|
or |
| |
Press the 
or  button on the key.
|
| |
The alarm is switched off.
|
Tow-away protection*
An audible and visual alarm is triggered if your vehicle's angle of inclination is altered while tow-away protection is primed. This happens if the vehicle is jacked up on one side, for example.
Priming tow-away protection
| |
Lock the vehicle using the key.
|
| |
Tow-away protection is primed after approximately 30 seconds.
|
To deactivate tow-away protection
Tow-away protection is automatically deactivated when you unlock your vehicle using the key.
Deactivate tow-away protection manually to prevent a false alarm if your vehicle:
-
is being transported
-
is being loaded, e.g. onto a ferry or car transporter
-
is being parked on a movable surface, e.g. split-level garages
 |
| To deactivate tow-away protection |
 | Indicator lamp |
|
| |
Remove the key from the ignition lock.
|
| |
Press button .
|
| |
Indicator lamp lights up briefly.
|
| |
Lock the vehicle using the key.
|
| |
Tow-away protection remains deactivated until the vehicle is unlocked and locked again.
|
Interior motion sensor*
If the interior motion sensor is primed, a visual and audible alarm is triggered if movement is detected in the vehicle interior while the vehicle is locked. This occurs, for example, if someone breaks the side windows of your vehicle or reaches into the vehicle's interior.
Priming the interior motion sensor
| |
Make sure that:
-
the side windows are closed
-
the stowage compartment under the armrest is closed.
-
there are no objects, e.g. mascots, hanging on the rear-view mirror or on the grasp handles on the roof trim.
|
| |
This will prevent false alarms.
|
| |
Make sure that the roof is closed.
|
| |
The interior motion sensor can only be primed when the roof is closed (with the exception of vehicles for the Netherlands).
Vehicles for the Netherlands: the interior motion sensor is primed even when the roof is open. However, the roof should be closed so as to prevent a false alarm.
|
| |
Make sure that the boot lid is closed.
|
| |
Only then can the interior motion sensor be primed.
|
| |
Lock the vehicle using the key.
|
| |
The interior motion sensor is primed after approximately 30 seconds.
|
Original Element p durch Gültigkeiten gefiltert!
To deactivate the interior motion sensor
To prevent a false alarm, deactivate the interior motion sensor if you lock your vehicle and
 |
| Indicator lamp |
| To deactivate the interior motion sensor |
|
| |
Remove the key from the ignition lock.
|
| |
Press button .
|
| |
Indicator lamp flashes briefly.
|
| |
Lock the vehicle using the key.
|
| |
The interior motion sensor remains deactivated until the vehicle is unlocked and locked again.
|
