Features
Cigarette lighter
 | Risk of fire and accident |
|
You could suffer burns from contact with the hot cigarette lighter. Only hold the hot cigarette lighter by the knob.
Remove the cigarette lighter if children are travelling in the vehicle. Children could sustain injuries from the hot cigarette lighter or start a fire.
You must always pay attention to road and traffic conditions. You could otherwise cause an accident and injure yourself and others. Only use the cigarette lighter when road and traffic conditions permit.
|
The 24V socket with the cigarette lighter is located to the right of the instrument panel on the dashboard.
 | 24V socket with cigarette lighter |
You can also use the 24V socket with cigarette lighter as a power source for electrical devices up to 100W.
Stowage spaces and compartments
| Risk of injury |
|
Do not transport heavy items, e.g. bottles, in the stowage spaces and compartments.
The stowage spaces and compartments must be closed and locked while the vehicle is in motion. Otherwise, you or other vehicle occupants could be injured by objects being thrown around the vehicle in the event of an accident, braking or a sudden change in direction.
|
 |
| Handle |
|
 | |
|
The load per stowage compartment may not exceed 4 kg.
|
Opening the stowage compartment
 |
Pull the handle upwards and open the cover.
|
Closing the stowage compartment
| |
Lift the cover upwards and engage it audibly.
|
Axle load measuring device
The axle load measuring system transfers the axle load from the pressure in the air spring bellows, if the chassis frame is in driving position.
 | |
|
The axle load measuring device is not calibrated nor is it a system capable of calibration. The measured data only provides an approximate guide which is not suitable for official use.
In order to avoid inaccuracies in measuring, make sure that the vehicle is uniformly laden.
If the axle load indicator is called up and the chassis frame is not in driving position, then the arrows in level control display  flash. The display does not show axle loads.
|
Calling up the axle load indicator
Before calling up the axle load indicator:
| |
Park the vehicle on an even, level surface and apply the parking brake.
|
| |
Move the chassis into the driving position more.
|
| |
Switch off the pull-away aid (starting-off aid) more.
|
| |
In the Monitoring info main menu of the on-board computer call up the submenu Axle load indicator more.
|
| |
|
You can adjust the axle load indicator if there is a notable difference between the axle load indicator and the weighbridge results.
|
Setting the axle load indicator
Control panel for level control
to switch off the control panel for level control.
(for the 1st axle) or button 
(for the 2nd axle) or button 
(for the 3rd axle).
until the displayed value equals the value indicated by the weighbridge.
until the displayed value equals the value indicated by the weighbridge.