Econic Online Operating Instruction

Lighting

Light switch

The light switch is used to switch the following on and off: headlamps, front foglamps, tail lamps, licence plate illumination and rear foglamp.

To switch on the front foglamps
To switch on the front and rear foglamps
Lights switched off/daytime driving lights switched on
Side lights, switch illumination switched on
Dipped-beam headlamps/main-beam headlamps (depending on the combination switch position)

Switching on the lights

  

Turn the vehicle key to the drive position in the ignition lock.

Dipped-beam headlamp

The dipped-beam headlamps are asymmetrical. For this reason, in countries where vehicles drive on the other side of the road to the country where the vehicle is registered, there is a danger of oncoming traffic being dazzled.

  

Turn the light switch to the position.

 

The dipped-beam headlamps are switched on. The indicator lamp in the instrument cluster lights up.

Daytime driving lights

In some countries, daytime driving lights are required by law.

  

Turn the light switch to the position.

 

The dipped-beam headlamps, side lamps and licence plate lighting are switched on when the engine is running.

The indicator lamp in the instrument cluster lights up.

Main-beam headlamp
  

Switch on the dipped-beam headlamps.

  

Push the combination switch on the left of the steering column forwards and engage.

 

The main-beam headlamps are switched on. The indicator lamp in the instrument cluster lights up.

Front fog lamps and rear fog lamp
ARKI Themenmodul "Warnhinweis" nicht gefunden!

ARKI Themenmodul "Warnhinweis" nicht gefunden!

  

Turn the light switch to the or position.

  

To switch on the front foglamps: pull the light switch out to position .

or
  

To switch on the front and rear foglamps: pull the light switch out to position .

 

The rear foglamp indicator lamp (yellow) in the light switch lights up.

 

Turn signals

Right-hand turn signal
Left-hand turn signal
  

To indicate briefly: press the combination switch in the direction of arrow or to the pressure point and hold it.

or
  

Press the combination switch briefly in the direction of arrow or .

 

The respective turn signals flash 3 times.

  

To indicate: press combination switch in the direction of arrow or beyond the pressure point.

 

Interior lighting

The interior lighting switches on when the driver's or co-driver's door is opened.

The lighting switches off after a delay when the doors are closed or if the vehicle key is turned to the drive position in the ignition.

Interior lighting switch

  

To switch on the interior lighting: press the upper section of the interior lighting switch.

  

To switch off the interior lighting: press the interior lighting switch to the neutral position.

  

To switch on the interior lighting automatically: press the lower section of the interior lighting switch.

 

The interior lighting switches on when the driver's or co-driver's door is opened.

Nightlight

Nightlight switch

  

To switch on: press the upper section of the nightlight switch.

  

To switch off: press the lower section of the nightlight switch.