Parking brake
 Display message
Parking lamps
 See Side lamps
Perimeter lamp
 Changing bulbs
Platform dropside
 See Dropsides
Positioning the jack
Power hydraulics
 
 Activating
 Adjusting the flow rate
 Checking the oil level
 Deactivating
 Electronic level gauge
 Fill mode
 Hydraulic connections
 Hydraulic system schematic
 Topping up the oil
Power steering
 Display message
Power take-offs
 Engine-driven power take-off
 Transmission-driven power take-off for vehicles with AutomaticShift®
 Transmission-driven power take-off for vehicles without AutomaticShift®
 Working speed control for vehicles with AutomaticShift®
 Working speed control for vehicles without AutomaticShift®
Practical advice
 Engine
Preparing for a journey
 Emergency equipment/first-aid kit
 Fuel level
 Vehicle lighting, turn signals and brake lamps
 Visual check of the vehicle exterior
Protection of the environment
PTO gear
 Limiting the PTO speed to 540 rpm
Pulling away
 Pulling away on slopes, using kickdown
Pulling away with AutomaticShift®
 Pulling away in automatic operating mode
 Pulling away in manual operating mode
Pulling away without AutomaticShift®
 Choosing a pull away gear
 Pulling away
 Without preselection
 With preselection